CW600 premium Help!

[d_tran]

Hey guys, I just bought a new CW-600 premium, I was wondering if someone could guide me to how to set it up. I just took it out the box, so there's nothing on it, could someone please kindly provide step by step instructions, very much appreciated.:(

[Priestmill]

Hi d_tran and welcome. Read thru the stickys here for a start and
see how it goes. Then post back again with any questions.

CW 600 Premium Help - FTA Doc FTA Satellite Receiver Forum Guides FTA Bin Files For Sonicview Viewsat Coolsat Pansat CaptiveWorks Captain CNX (To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.)

[d_tran]

Thanks for the links!
Is there a file I'm suppose to load onto the receiver before loading the bin because I tried loading the bin, but nothing happens?

[Carpenter1]

No you don't need anything else, here is step by step >> To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.

And here it is with pictures >> To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.

Make sure you unzip the Bin file before you try to load it into the receiver using WinRar to unzip >> To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.

[d_tran]

Once last question, I was using a coolsat 5000 receiver prior to buying the captive works, what should i change the satellite settings to capture the channels?

[Priestmill]

If dish, lnb, switches, etc did not change then the antenna settings
for the CW600 premium will be the same. Other settings such as
time, sid, a/r and tp etc will also be the same.

[SONofSAM]

They are are very nice unit! The only thing i noticed while at my buddies place was the remote can be a little sticky. Other than that they are a great unit!!! :rockon: If you run into any little bugs just let us know. We are here to help! :monkey:

[Jose2001]

Hey guys, I just bought a new CW-600 premium, I was wondering if someone could guide me to how to set it up. I just took it out the box, so there's nothing on it, could someone please kindly provide step by step instructions, very much appreciated.:(

im only cheking back dit you fix your problem

[d_tran]

Thanks so much for all the help guys and the quick response! Very much appreciated!:thumb: