SV-360_Elite_FTA_Channel list for 87w(c-band),83w,123w_ku/linear_7/14/09

[Knight]

Here is an FTA channel list for SV 360 Elite_87w(C-band),83w ku/linear,123w ku/linear.Enjoy.:biggrin:

[Knight]

Here's another one w/ the correct channels listed for 123w.
Ex.Movie-1_Movie-2_Movie-3_and Th!s.
Enjoy.:biggrin:

[Knight]

Attn:123w is losing there channels.On the channel list movie 2 and movie 3 are gone.The only ones left are Movie-1 (A movie channel)and Th!s-(A movie channel).And some feeds.(like regular channels).This is probably due to the transition from analog to digital.:radar:

[Jed]

Actually, I've read on Wikipedia that Equity Broadcasting is going bankrupt and they're selling off their stations.

[Jed]

The test pattern is still there but we lost programing on KQUP this morning.:frown: .

[Knight]

The test pattern is still there but we lost programing on KQUP this morning.:frown: .

Hey Jed check this out on movie 2 on channel list it is black but the commercials come on.Actually 3 chan. up from th!s movie chan.was testing and found the comm. come in but not the program almost as if there was a key code activated.of course there aren't any Ecm's on Fta.:tongue:
Although there are some broadcasters that have made changes in their 3rd quarter program schedules so there may be some new changes in programming and possibly some channel changes.
Have been scanning all birds lately and finding several new chan.:radar:
Here's a hardy handshake and good luck testing my friend.:smile::wcool:

[Jed]

What are you viewing your SV360 channel lists with? I didn't want to risk loading it in my SV4K so I tried using Channel Master v1.17.2 and then Channel Master v1.20.3 . Neither program would work with the channel list I took from my SV4K nor would they work with the channel list you provided. They do however work with the ".ndf" files from my old Coolsat.


btw I know what you mean by finding some strange stuff. Take a look at my post in
Satellite/Transponder Foot Prints -- Galaxy 16 at 99.0°W - C-band (To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.) :biggrin:

[Knight]

What are you viewing your SV360 channel lists with? I didn't want to risk loading it in my SV4K so I tried using Channel Master v1.17.2 and then Channel Master v1.20.3 . Neither program would work with the channel list I took from my SV4K nor would they work with the channel list you provided. They do however work with the ".ndf" files from my old Coolsat.


btw I know what you mean by finding some strange stuff. Take a look at my post in
Satellite/Transponder Foot Prints -- Galaxy 16 at 99.0°W - C-band (To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.) :biggrin:

----------------------------------------------------------------------------------------------------------------------------------------------------
Hey Jed These Channel Lists are for the SV.360 Elite Only!!!
They have been tested on the SV.360 Elite Only.
Your right you don't want to load into SV. 4000 Only the SV.360 Elite.
This is actually pretty good timing there have been some "New" channels made available.
Going to make another channel list w/all the "New" channels.
There are 2 more on 87w C-Band and 2 more on 123w ku/linear.

That's a coincidence that they work for the CS.

If you need a channel list for the SV.4000 just take the main tp's and enter them into each bird then find the birds and scan individually and you will have the same channel list for your SV.4000.

By the way did you ever find RTN?
If not there is another way to increase your signal strength.:wcool:

[Jed]

I hate to admit it but I haven't been back over to 83w to even try again. I
was using my HTS70 to move the dish but it quit so now I'm using an old
controller that a friend was going to throw away. It's doesn't have a display
but it does have two buttons and will move the bud to the marks I made for
the different satellites on actuator arm. Which means it a two man operation
or a "get the wife involved" operation. :twitcy:



I believe you misunderstood what I was talking about earlier. I was wondering
what computer program you could use to view the channel list? I have the
two versions of Channel master and both programs will work with the .ndf
files from my CS6K but neither will work with the .bin files from my SV4K or
the files you provided. It keeps giving me "unknown bin file format".
I was hoping if I could just look at them, then I would know what I was
missing. :laugh:

btw I'm always up for ways to improve my signal. Hopefully I'll get to work on
it tomorrow.

[Knight]

I hate to admit it but I haven't been back over to 83w to even try again. I
was using my HTS70 to move the dish but it quit so now I'm using an old
controller that a friend was going to throw away. It's doesn't have a display
but it does have two buttons and will move the bud to the marks I made for
the different satellites on actuator arm. Which means it a two man operation
or a "get the wife involved" operation. :twitcy:



I believe you misunderstood what I was talking about earlier. I was wondering
what computer program you could use to view the channel list? I have the
two versions of Channel master and both programs will work with the .ndf
files from my CS6K but neither will work with the .bin files from my SV4K or
the files you provided. It keeps giving me "unknown bin file format".
I was hoping if I could just look at them, then I would know what I was
missing. :laugh:

btw I'm always up for ways to improve my signal. Hopefully I'll get to work on
it tomorrow.

--------------------------------------------------------------------------------------------------------------------------------------------------
Yes there is a program somewhere to read these f!les.:biggrin:
There is always another way to skin a Cat.lol.:wink:
Will send pm w/details.:wcool: