Gozi
11-15-2007, 08:37 PM
Connect the master (the one with the info) and slave receiver (the one you want to clone to) with a Null RS232 cable. Start the master receiver and press "POWER" key to make it standby “- - : - -“ or show time.
Start the slave receiver & that will make the master receiver led display 'H' and blink.
Input a password from the remote
111 to Transfer S/W (BIN file)
222 to Transfer data (channels)
333 to Transfer data, then S/W (BIN , channel settings)
444 to Copy whole flash except Boot Loader.
After inputting the password the transfer will begin. When it finish, the LED will Display "-End". Disconnect the cable & start your receiver you are done.
Start the slave receiver & that will make the master receiver led display 'H' and blink.
Input a password from the remote
111 to Transfer S/W (BIN file)
222 to Transfer data (channels)
333 to Transfer data, then S/W (BIN , channel settings)
444 to Copy whole flash except Boot Loader.
After inputting the password the transfer will begin. When it finish, the LED will Display "-End". Disconnect the cable & start your receiver you are done.